PolyMax™ PC

Features Polymaker's Nano-reinforcement technology

PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality. PolyMax™ PC is an engineered PC filament combining excellent strength, toughness, heat resistance and printing quality. It is the ideal choice for a wide range of engineering applications.

Excellent Toughness - PolyMax™ PC offers best in class toughness and much improved mechanical strength compared to ABS and PLA under almost all testing conditions.

Great heat resistance - PolyMax™ PC offers better heat resistance than a wide variety of material types, withstanding temperatures well above 110 ºC.

Improved printability - PolyMax™ PC has been engineered specifically with compatibility and usability in mind. PolyMax™ PC not only offers excellent properties and print quality, but also improved printability.

Uncompromised Quality - Polymakers leading quality control process and rigorous in-house testing, and rigorous in-house ensure reliable printing and consistency across spools and batches.

Find a reseller

Technology

PolyMax™ PC features Polymaker's Nano-reinforcement technology:

Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance.

Print Settings

Nozzle Temperature:
250˚C – 270˚C

Printing Speed:
30mm/s – 50mm/s

Bed Temperature:
90˚C – 105˚C

Bed Surface:
BuildTak®, PEI sheet

Cooling Fan:
OFF

Mechanical Properties

Young’s Modulus:
2048 ± 66 Mpa

Tensile Strength:
59.7 ± 1.8 Mpa

Bending Strength:
94.1 ± 0.9 Mpa

Impact Strength:
25.1 ± 1.9 kJ/m2

Compare

Thermal Properties

Glass Transition Temperature:
113˚C

Vicat Softening Temperature:
117˚C

Melting Temperature:
N/A

Compare

Notes

Drying Settings:
90˚C for 8h

Recommended Support Materials:
PolySupport™

When printing with PolyMax™ PC it is recommended to use an enclosure. For large parts it is recommended to use a heated chamber.

It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
Annealing settings: 100˚C for 2h

TDS:
Contact your local reseller

SDS:
Contact your local reseller