PolyDissolve S1

PolyDissolve™ S1

PolyDissolve™ is a family of dissolvable support filaments. This family offers support solution for our portfolio of filaments. It enables a greater design freedom.

PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.

FEATURES

Complex Geometry - PolyDissolve™ S1 is a preferable solution when printing complex geometries, overhangs, internal cavities and complicated structures. It liberates you from support removal problems, and enables greater design freedom.

Wide Material Compatibility - PolyDissolve™ S1 is engineered to have a good adhesion and perfect interface with a variety of supported materials from Polymaker including Nylon, PLA, TPU and PVB.

Water Soluble - Optimized to dissolve in water, supports printed in PolyDissolve™ S1 will dissolve in tap water. Safe and easily accessible!

Improved surface quality - Greatly improve the surface quality where supports interface with your prints when using PolyDissolve™ S1.

Quality Control - Polymakers leading quality control process and rigorous in-house testing, ensure reliable printing and consistency across spools and batches.

Find a reseller

Print Settings

Nozzle Temperature:
215˚C – 225˚C


Printing Speed:
20mm/s – 40mm/s


Bed Temperature:
25˚C – 60˚C


Bed Surface:
Glass with glue, blue tape


Cooling Fan:
ON


Note: Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters

Material Compatabilities

PLA based material from Polymaker’s portfolio + +


PETG based material from Polymaker’s portfolio +


ABS based material from Polymaker’s portfolio – –


PC based material from Polymaker’s portfolio – –


PVB based material from Polymaker’s portfolio + +


TPU based material from Polymaker’s portfolio + +


Nylon based material from Polymaker’s portfolio + +


+ + support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model

Notes

Drying Settings:
80˚C for 12h


Other:
It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S1 and to store it in the resealable bag.


Technical Data Sheets:
Contact your local reseller


Safety Data Sheets:
Contact your local reseller