Engineered to generate easy to remove support material!
PolySupport was engineered to offer users a new solution to one of FDM 3D printings most intimidating problems: Support Material. PolySupport prints easily and can be stored like other 3D printing materials, with no sensitivity to normal moisture and heat. PolySupport generates adequate support structures to assist the construction of your 3D printed part. You don’t need to use tools and risk damaging your 3D print, simply peel PolySupport away with your hands! Suitable for both Single and Dual extrusion 3D printers in 1.75mm and 2.85mm diameter.
Whether you’re using dual-extrusion or single-extrusion, PolySupport is there to support your needs. PolySupport can be used as either a dedicated support material or as the support and modelling material. In both cases, the support structure can be removed easily!
Support material can be difficult to remove and in some cases you may need to use tools which can damage part. Polymaker developed PolySupport, a material specifically engineered to generate easy to remove support structures that are still adequate to support the print in progress.
PolySupport was engineered to work like your regular 3D printing filaments. Storing and printing PolySupport is easy with no sensitivity to normal moisture or heat and is removed easily with no need to work with tools or dangerous organic solvents.
Polymaker are market leaders for quality in the 3D Printing Industry. All Polymaker filaments go through an 8 step process of quality control to ensure the filament that reaches your door meets the quality expectations of Polymakers experienced technicians.
Net Weight ~ 500g
Density ~ 1.20 – 1.25 g/cm3
Diameters ~ 1.75 mm or 2.85 mm
Tolerance ~ ± 0.05 mm50 Microns(Typical~ ± 0.02 mm )
Recommended 3D printing temperature225 – 235 °C (Diameter of 1.75 mm)225 – 235 °C (Diameter of 2.85 mm)
Recommended 3D print speed≤ 50 mm/s
Recommended heated bed temperatureNot Required
Build platformAll our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with BuildTak™, a build plate surface designed specifically for desktop FDM/FFF printers.
Download PolySupport Product Info Sheet
Download PolySupport User Guide